Download ETA Dynaform 5.9.4 Build 2019.01.21 (x64) Multilingual

Engineering Technology Associates, Inc. (ETA) has presented DYNAFORM Version 5.9.4 is a simulation software solution specifically developed to simulate the sheet forming process and analyze the entire die system.

This type of simulation and analysis allows organizations to bypass soft tooling, reduce tryout time, lower costs, increase productivity and improve cycle times. OfferVersion 5.9.3 promises an even more streamlined and robust experience with major improvements in blank/trim line development, the addition of Auto SCP and process templates, as well as a new license control. DYNAFORM 5.9.4 offers major improvements in blank/trim line development including combining the interface for blank development and trim line development. Improving efficiency, in this new version it is now possible to develop the blank outline and trim line simultaneously.

In addition, the user can now develop partial blank outlines and partial trim lines and develop a blank outline with a cut pattern. The new Auto SCP feature is used for automatic springback compensation iterations. When running the springback function in DYNAFORM, the user first defines the stamping stages. This is easily achieved using the step-by-step guided user interface. The user then defines the tool to be compensated, compensation zone, compensation method, scale factor and iterations for a customized and accurate result.

The job is submitted and, when completed, the program automatically checks the springback amount and calls the solver to make a compensation adjustment for the tooling mesh. The compensated tool then replaces the original tool and multi-stage jobs are rerun until the ideal solution is found.

Blank Size Engineering (BSE)
BSE is widely used for estimating blank size, along with blank nesting for maximum material usage, scrap & piece price. The plug-in is used to predict thinning, thickening & also to generate a forming limit diagram (FLD).

Formability Simulation (FS)
FLD copyFS facilitates the rapid development & validation of single-station & progressive die designs. It uncovers hidden problem areas & enables designers to optimize designs based on accurate forming results.

Die Evaluation (D-Eval)
Since most tooling designs are done in a CAD environment, DYNAFORM’s D-Eval Module was specially created to support and analyze CAD based tooling and engineering designs.

Die System Analysis (DSA)dsiDSA efficiently predicts many stamping related concerns within the die production line. It is used to analyze scrap shedding/removal, die structural integrity & sheet metal transferring/handling.

Optimization Platform
This module helps users to go beyond identifying problem areas, by incorporating design optimization to improve performance and quality – reducing wrinkling, thinning and tearing.

How to install:

  • First of all, Download the ETA Dynaform 5.9.4 Build 2019.01.21 (x64) Multilingual
  • Extract the setup file and wait until all installation procedure complete.
  • Use registration code to activate it.

FAQ:

Q:What is inside that .rar file?
A:There is ETA Dynaform 5.9.4 Build 2019.01.21 (x64) Multilingual which you need to extract with Winrar.

Q:Why Surveys?
A:The Survey is there to protect our links from spammers and bad intoned people, and to make sure that our products will stay online.

Q:But how you will avoid spammers and bad intoned people?
A:Simple, only interested people would download and take some time to complete simple survey, the survey act as a filter.

Virus Scan